I am looking for a laptop (or a tablet with attachable keyboard) that does not come with or allows for physically removing/disabling/destroying of all wireless connectivity hardware. Something cheap, around 200€ would be nice. I would only use this device for word processing, file management, and creating backups on LUKS encrypted drives. Should be able to run gnu-linux.

The closest thing I was able to find was the pinebook by pine64.org, which has killswitches for wifi and bluetooth. Sadly, these are controlled through software and not through a hardware switch.

Does anyone know of a cheap device with hardware killswitches, or a device that allows removing/destroying wifi and bluetooth components on the motherboard (without breaking)?

EDIT 1:

I am looking to buy a new device, not used, and with good enough performance to run a modern desktop environment such as gnome, kde, or cinnamon.

EDIT 2:

Following the advice of some commenters here, I have looked for models that I like, and tried to find a image/video of the motherboard. So far, every motherboard that I could get an image/video of, had the wifi/bluetooth chip soldered onto the motherboard. If anyone knows a brand that offers cheap laptop with modular mainboards, please let me know.

EDIT 3:

Some people here suggested buying an old ThinkPad. I checked for newer models made by the same company (“Lenovo”), and according to their hardware manual, the “IdeaPad” model also allows removing the wifi card, just like the ThinkPad did.

Here is a link to the manual for anyone who is interested (see page 43): https://download.lenovo.com/consumer/mobiles_pub/ideapad_1_hmm.pdf

This solution will work well for my use case and budget. Thanks you all for the advice.

  • AnExerciseInFalling
    3·
    1 month ago

    The pinebook’s privacy switches (for WiFi/BT, camera, and microphone) operate at the firmware level, the operating system has no control over them

    https://wiki.pine64.org/wiki/Pinebook_Pro#Privacy_Switches

    The keyboard operates on firmware independent of the operating system. It detects if one of the F10, F11 or F12 keys is pressed in combination with the Pine key for 3 seconds. Doing so disables power to the appropriate peripheral, thereby disabling it. This has the same effect as cutting off the power to each peripheral with a physical switch. This implementation is very secure, since the firmware that determines whether a peripheral gets power is not part of the Pinebook Pro’s operating system. So the power state value for each peripheral cannot be overridden or accessed from the operating system. The power state setting for each peripheral is stored across reboots inside the keyboard’s firmware flash memory.