I’ve spent the past day working on my newest Poweredge R620 acquisition, and trying to nail down what things I can do without checking. Google has shown me that everyone seems to be having similar issues regardless of brand or model. Gone are the days when a rack server could be fully booted in 90 seconds. A big part of my frustration has been when the USB memory sticks are inserted to get firmware updated before I put this machine in production, easily driving times up to 15-20 minutes just to get to the point where I find out if I have the right combination of BIOS/EUFI boot parameters for each individual drive image.

I currently have this machine down to 6:15 before it starts booting the OS, and a good deal of that time is spent sitting here watching it at the beginning, where it says it’s testing memory but in fact hasn’t actually started that process yet. It’s a mystery what exactly it’s even doing.

At this point I’ve turned off the lifecycle controller scanning for new hardware, no boot processes on the internal SATA or PCI ports, or from the NICs, memory testing disabled… and I’ve run out of leads. I don’t really see anything else available to turn off sensors and such. I mean it’s going to be a fixed server running a bunch of VMs so there’s no need for additional cards although some day I may increase the RAM, so I don’t really need it to scan for future changes at every boot.

Anyway, this all got me thinking… it might be fun to compare notes and see what others have done to improve their boot times, especially if you’re also balancing your power usage (since I’ve read that allowing full CPU power during POST can have a small effect on the time). I’m sure different brands will have different specific techniques, but maybe there’s some common areas we can all take advantage of? And sure, ideally our machines would never need to reboot, but many people run machines at home only while being used and deal with this issue daily, or want to get back online as quickly as possible after a power outage, so anything helps…

  • Awwab
    link
    fedilink
    161 year ago

    6 min seems about right for an enterprise server, the more you have like a raid card initialization the longer it will be. Since there devices are designed to be run for months or years without rebooting it really doesn’t matter that the reboot takes as long as it does.

    • @[email protected]OP
      link
      fedilink
      English
      71 year ago

      It’s a bit of a shock to me. These are being used to replace some Poweredge 860’s where POST time was pretty identical to that of a desktop, even though they too had PERC raid controllers in them. And sure, the NAS has the PERC plus a pair of 16-port LSI cards to initialize, but that doesn’t seem to make a difference on the boot time between the other machines with only the onboard PERC.

    • @[email protected]
      link
      fedilink
      English
      11 year ago

      Sorry but not really.
      My workplace is an HPE shop and our DL3XX Gen8 and above can boot in about <4-3min to the OS part.