Can someone recommend a good resource for getting a neglected bike back into riding condition? What tools I need, what sort of parts I should check if they need replacement, so on?

  • kersploosh@sh.itjust.works
    link
    fedilink
    arrow-up
    12
    ·
    1 year ago

    As a general resource, Park Tool has a great collection of service and repair guides. They list the tools you need for each type of repair.

    Here’s the basic maintenance checklist for an old neglected bike:

    • Inspect anything rubber, and replace as needed. Tires and brake pads harden over time.
    • Drip some thin lube (Tri-Flow or light oil) into the cable housings. Run the cables through the housings to spread the lube throughout.
    • Lubricate all the pivot points on the derailleur(s), as well as the axles of the rear derailleur pulleys.
    • Lubricate the pivot points on the brakes. Be careful not to get lube on the brake pads.
    • Lube the chain and check chain “stretch” using a chain gauge. Or just replace it and start fresh.

    And if you really want to get into it, here are some more advanced maintenance items:

    • Repack the wheel hubs with fresh grease.
    • True the wheels.

    To build a basic toolkit, start with this:

    • Tire levers
    • Phillips screwdriver, size 0 or 1.
    • A small flat-head screwdriver.
    • Metric hex/allen wrenches. 4mm and 5mm sizes are the most common. Get a set that goes from 1.5mm to 10mm. Having ball ends on the 4mm and 5mm wrenches can be a lifesaver.
    • Metric box-end wrenches. 8mm, 10mm, 13mm, 15mm, 17mm are all common sizes.

    More advanced maintenance will require special tools specific to the parts installed on your bike. The designs of freehubs/cassettes/cranks/bottom brackets have all changed a lot over the last few decades.