Stainless is an insulator of heat. In fact, it’s used in 3D printers to avoid heat traveling up the path where the filament is fed in from.
Copper with a silver or rhodium plating would be a good choice otherwise. Copper has a higher thermal conductivity than aluminum, and silver has an even higher thermal conductivity, but is also hypoallergenic.
I wouldn’t call it an insulator but it is a poor conductor of heat compared to aluminum. I think in this situation either one would be capable of dissipating heat better than just about any blanket.
Right, like I said a poor thermal conductivity but as far as blankets go, you won’t find anyone attempting to get warm with chainmail because it would unfortunately result in an increased loss of body heat. In so far as blankets go, not an insulator.
Also worth mentioning I was trying to stay in the real of possibilities and this case stainless wire is readily available in many forms for welding, and would resist oxidation better than copper. Obviously we can just name the best conductors of heat.
Copper wouldn’t be difficult to plate in silver; you can buy plating solutions pretty easily, enough to plate a blanket easily. Copper is also incredibly easy to get, and not only has the highest thermal conductivity but also the highest weight as well. (of malleable metals at least; tungsten beats it out weight wise, but couldn’t be easily formed)
Stainless also work hardens much faster than copper. Much bending at all and it starts to fracture. It wouldn’t last long as a blanket - though there are ways around that, such as how you make the blanket; chainmail, etc.
Copper can be thin enough, and malleable enough to be woven like a standard fabric as well, resulting in a ‘softer’ feeling.
Seems like you would want to use stainless steel instead of aluminum if you’re going for weight.
If weight is the only thing you care about, then sure. The only problem is even normal weighted blankets can be an absolute furnace in the summer.
just insulate your house and shove an air conditioner on it to lower the temperature to 40°F
This is what I’m talking about. Make sure you insulate it with stainless steel though. It’s in the insulation section at your local hardware store.
Stainless is an insulator of heat. In fact, it’s used in 3D printers to avoid heat traveling up the path where the filament is fed in from.
Copper with a silver or rhodium plating would be a good choice otherwise. Copper has a higher thermal conductivity than aluminum, and silver has an even higher thermal conductivity, but is also hypoallergenic.
I wouldn’t call it an insulator but it is a poor conductor of heat compared to aluminum. I think in this situation either one would be capable of dissipating heat better than just about any blanket.
You would be wrong in not calling it an insulator. Sorry.
https://www.engineeringtoolbox.com/thermal-conductivity-metals-d_858.html
Feel free to look at the chart linked above and compare to almost any other common metal.
Air has a thermal conductivity of 0.028 W/(mK)
Copper, around 413 W/(mK)
Stainless is 14 W/(m*K)
In so far as metals go, stainless is a heat insulator.
Right, like I said a poor thermal conductivity but as far as blankets go, you won’t find anyone attempting to get warm with chainmail because it would unfortunately result in an increased loss of body heat. In so far as blankets go, not an insulator.
Also worth mentioning I was trying to stay in the real of possibilities and this case stainless wire is readily available in many forms for welding, and would resist oxidation better than copper. Obviously we can just name the best conductors of heat.
Copper wouldn’t be difficult to plate in silver; you can buy plating solutions pretty easily, enough to plate a blanket easily. Copper is also incredibly easy to get, and not only has the highest thermal conductivity but also the highest weight as well. (of malleable metals at least; tungsten beats it out weight wise, but couldn’t be easily formed)
Stainless also work hardens much faster than copper. Much bending at all and it starts to fracture. It wouldn’t last long as a blanket - though there are ways around that, such as how you make the blanket; chainmail, etc.
Copper can be thin enough, and malleable enough to be woven like a standard fabric as well, resulting in a ‘softer’ feeling.
In fact, they already make the stuff: https://nano3dsystems.com/product/copper-nickel-conductive-fabric/
They make Stainless too - but it only consists of 30% conductive material. https://nano3dsystems.com/product/stainless-steel-conductive-fabrics/
Silver would just bend though as it would be too malleable on its own