I decided to clean out my CPU fan as it was clogged, when I assembled everything again it won’t turn on 🙁

It’s an old desktop PC. There are no lights glowing on the motherboard at all, though there is none specifically labelled “power”. Just CPU, RAM, BOOT. None of these light up, not even a flash when it starts.

I have reseated the RAM, CPU, power cables. Removed the GPU to check.

The cord leading in to the PSU works but I don’t have a way to test the PSU itself or the out cables, but I have reseated them at each end.

This PC was working fine before. But with no lights on the motherboard I suspect either the mobo or PSU?

Mobo is asrock x570 PSU is silverstone 650w strider gold S series

Any help appreciated!

  • Dave@lemmy.nzOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    14 hours ago

    I don’t. No other desktop in the house, no spare parts 🙁

    • Moonrise2473@feddit.it
      link
      fedilink
      English
      arrow-up
      5
      ·
      13 hours ago

      It’s dangerous and you can blew it if you don’t know what are you doing but by shorting two specific pins, it’s possible to turn on the PSU and see it it’s working or not

      Did you use a vacuum on the fans and let them spin during the clean?

      • Dave@lemmy.nzOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        12 hours ago

        Not on the PSU fans, and was using canned air cleaning stuff.

        Someone else posted a link about testing the PSU. I’ll consider it.

        • voracitude@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          6 hours ago

          When you tear down next, look for missing board components or any that lean at an angle they’re not supposed to. Canned air has been known to shear poorly-attached caps or whathaveyou clean off the board. Or maybe one of the wires in the 12v cable is broken and it’s delivering power just to most pins… The paperclip test just tells you if the PSU is dead dead, are you able to test with a multimeter instead?

          Buzzing while the power supply is off makes me wonder if there’s literal bugs in it, if it’s buzzing while it’s unplugged. I suppose the buzzing could also be remaining power discharging, if it happens just after it’s been unplugged.

          • Dave@lemmy.nzOP
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 hour ago

            Honestly the canned air I have doesn’t blow that hard, it struggled taking the dust off I doubt it could damage anything. I have had a look over the board and there’s no obvious damage.

            I’m thinking today’s plan might be to buy a multimeter.

            The buzzing is immediately after being switched off, so you could be right, could be power discharging.

    • terraborra@lemmy.nz
      link
      fedilink
      English
      arrow-up
      2
      ·
      12 hours ago

      I pulled a psu out of my rig over the weekend. I was just going to chuck it on Trademe for $1. Let me know if you need it, though shipping might take a few days.

      • Dave@lemmy.nzOP
        link
        fedilink
        English
        arrow-up
        2
        ·
        11 hours ago

        I did a paperclip test and the PSU seems fine, but thanks for the offer. Got to be mobo or CPU I think.