Ethernet plugged in but there is no internet. I have no idea what happened. I just took a normal update like I always do and after that it was all gone. WiFi connects no problem, but there is no internet. Unplugged Ethernet and replugged it back in. Nothing. I dualboot with windows, internet works fine there, so there is no hardware issue. Went into a live environment and chrooted into it and reinstalled network manager and still not a fucking thing. Not sure what these are now. I know about the lo one, but never seen the second wired connection or the virbr0. Any idea how to get my Internet back? I really don’t want to reinstall the system because of this. And btw, I even tried a hotspot from my phone and a wire tether from it and still no internet.
System is endeavour OS with KDE on Wayland.
I’m not familiar with EndeavourOS, but I’ll ask a few questions to get the troubleshooting process started:
With the ethernet cable plugged in, can you access your local router config page (if you have one)? e.g.: 192.168.1.1. If not, what happens when you ping the router’s address in the terminal?
If you’re able to successfully ping/access your router, can you ping a well-known IP address such as 8.8.8.8 (google DNS) or 1.1.1.1 (cloudflare DNS)?
I can ping my gateway, nameserver, Google DNS 8.8.8.8, 1.1.1.1, but it freezes on 4.4.4.4. I even get really good latency, too
No one can ping 4.4.4.4, it doesn’t answer pings.
This seems like a dns issue, check
cat /etc/resolv.confand try setting the dns server in Networkmanager to “8.8.8.8”.Or, if you were already using 8.8.8.8, switch to 1.1.1.1.
My resolve.conf has this only
search lan nameserver 192.168.... the rest of the IP addressWhat do I change in here?
That seems correct, don’t change anything in there, try the command
dig @<routerip> www.google.comornslookup www.google.com <router ip>if the dig command is not found.Here is the dig command Dig command
Fwiw, you don’t really need to worry about your 192.168 address. It’s local to your network. I’m also on 192.168.1.x as it’s the most common internal address scheme for routers. But there are some that use 10.0.1.x or other variations.
We would need to know the external IP address that your ISP gives you to do anything with it. That should definitely be blocked out entirely if it appears in a screenshot or command output.
https://en.wikipedia.org/wiki/Private_network
…that’s the valid response, does
ping www.google.comwork andcurl www.google.comreturn a bunch of text?If
ping www.google.comdoesn’t work then your system isn’t using the correct dns server, though your local dns server works (as seen by the prior dig).If curl works then…you have a working internet connection, maybe check the browser settings for proxy or something.
I’m doing another chroot and I will reinstall the whole plasma desktop to see if that works. If not, I’m nuking the fucker and starting over. Best part of Linux, these fucking random issues.
Nameserver should be the IP of your router.
But you should check/set that with nmtui, then NetworkManager overwrites that file itself.
So I need 2 nameserver? One for the IP and one for the DNS?
You only need one. Standard is to use your router IP as local nameserver.
If your internet provider has issues with name resolutions, which happens sometimes, you can instead set 8.8.8.8 (Google’s nameserver) or 1.1.1.1 (Cloudflare’s nameserver). But then you can’t ping other devices in your local network by name, and loading websites can be a tiny bit slower.
Do I put the ipv4 address in there or the ipv4 default gateway? Because I see these two and they’re not the same IP. Now, I have the ipv4 default gateway in resolv.conf
DNS turns a domain name into an IP which can then be used to send data through your router, a dns server is the server which is used to do this conversion (www.google.com turns into an IP 1.2.3.4 (that isn’t the actual IP of google)).
There are many dns servers, normally your local devices use your router as the dns server, which forwards it to your ISP which they further transfer it over global dns servers.
Alternatively you could use Google’s DNS server (8.8.8.8) or cloudflares DNS server (1.1.1.1) but if the one on your router works then just use it.
nameserver is the same as DNS server
Tldr: set the router IP as your dns server, you only need this one.
With a few more words: set the router to use 8.8.8.8 or 1.1.1.1 and then set your computer to use 192.168.1.1 (or whatever your router’s IP is). Hope that is clearer for anyone who needs it.
I put my gateway there. Fuck, man. This is so stupid and annoying… I’m about to fucking nuke the whole fucking thing. I’m running out of patience. Why the fuck would they push a hardware update that fucks shit up like this?
I set nameserver 1.1.1.1 and also 8.8.8.8 and still nothing.
Did you restart your network connection?