Good day, I have some really hard time getting my gpu passed through to a vm, my current host is linux mint. The bios setting is fine, but for some reason I get a black screen every time the vm starts.
Im not sure if the card itself have limitations. Just want to confirm wether I am wasting my time on this card?
Im basically try to do a single gpu passthrough with scripts that will release gpu from host and pass through to vm, till the vm is shut down, then the host have control over the gpu again.
To quote the community description
This is a community for discussing things about programming.dev itself.
So you’d probably have better luck posting in a community directly related to your question. Maybe try /c/[email protected]
Regarding your issue, looking on L1 forums it appears that while some people have had similar issues while not exactly in the same scenario, it does appear possible to get PCIE pass-through to work with a rx6800 GPU.
While these links may not directly correlate, potentially something in these links may help to solve your issue:
- https://forum.level1techs.com/t/6800xt-reference-single-gpu-passthrough-no-signal/180289
- https://forum.level1techs.com/t/rx-6800-xt-passthrough-card-boot-looping-after-installing-radeon-drivers-on-guest/179074
- https://forum.level1techs.com/t/silverblue-vfio-on-x570-w6600-6800xt/176126
- https://forum.level1techs.com/t/radeon-rx-6800-xt-gpu-passthrough-virtio/173453/2
Thanks for the trouble and suggestions. Will go have a look at that community.
