It’s not much but it’s something. I have been tinkering with a 3d printer that was left behind by the old owner of my house. After many days of trial and error I finally was able to get something to print! It feels so good to be able to make something out of basically nothing. It’s not perfect and I have more to learn but am excited about all the new opportunities!
Link to thingiverse : https://www.thingiverse.com/thing:3023372
Looks like it may be underextruding a tiny bit, especially judging by the gaps between the walls. Try calibrating esteps and flow. Search for guides for this on Youtube. There are some handy websites too that you can input the numbers into and they’ll calculate the new esteps to use.
Cool, I’ll look into it. Thanks for the advice!
definitely a bit of under extrusion.
for the record, the formula is pretty simple.
its( [original esteps] x [intended length] ) / [obtained length] = [new value for esteps]I would suggest setting up a spreadsheet to simply the process.
I should mention that the printer is an ender 3 v2
“I have been tinkering with a 3d printer that was left behind by the old owner of my house.”
Be careful it wasn’t like the Jumanji board game! You might get stuck for 50 years! 😜
just jump in the freezer, you’ll pop right off.
