I set up an *arr stack and made it work, and now I’m trying to make it safe - the objectivly correct order.

I installed uncomplicated firewall on the system to pretend to protect myself, and opened ports as and when I needed them.

So I’m in mind to fix my firewall rules and my question is this: Given there’s a more sensible ufw rule set what is it, I have looked online I couldn’t find any answers? Either “limit 8080”, “limit 9696”, “limit …” etc. or “open”. Or " allow 192.168.0.0/16" would I have to allow my docker’s subnet as well?

To head off any “why didn’t you <brilliant idea>?” it’s because I’m dumb. Cheers in advance.

    • Fedegenerate@lemmynsfw.comOPEnglish
      1·
      10 months ago

      When it was active I was getting ads. I disabled the pi-hole registered an increase in traffic and there were no more ads. I don’t know why. It’s working as it is and I’ll tinker when I know more.

      • TCB13@lemmy.worldEnglish
        2·
        10 months ago

        Did you care to understand why at least? @[email protected] @[email protected] the reason you were getting more ads was simple. If the ISP router was running DHCP and IPv6 then te the devices connected to the network got their IP addresses from the ISP router and it would also provide ISP DNS servers (or router IP) completely bypassing your pi-hole.

        • Fedegenerate@lemmynsfw.comOPEnglish
          1·
          10 months ago

          Ah, I knew it was bypassing the pi-hole, I thought it was IPv6. I think I made the mistake of changing more than one thing at once, what I did worked and I moved on to the next functionality I was chasing. I’ll try enabling IPv6 on the pihole, I know at least if I get Ads with it on its not IPv6.

          • TCB13@lemmy.worldEnglish
            2·
            10 months ago

            I’ll try enabling IPv6 on the pihole, I know at least if I get Ads with it on its not IPv6.

            It’s both the IPv4 and IPv6 DHCP… You IPS router has to run DHCP (or similar) for both IP versions.

            Both of them will provide your machines with ISP DNS servers / gateway and the machines will bypass your pi-hole. Since most operating systems will prefer to use IPv6 over IPv4 if you enable IPv6 you’ll most likely get ANY ad from any company that runs on IPv6 (most likely everyone).

            When it comes to IPv6 it’s game over to the pi-hole if your ISP router doesn’t allow you to set custom IPv6 DNS servers (and set it to your pi-hole IPv6 address).

            Anyways, as long as you don’t go into the router ISP and tell it to “forward port X to port Y on pi-hole” you don’t even need a firewall running on pi-hole, as nothing from the public internet will be able to reach it.

            If you’re using a VPN on the Pi then you may run a firewall but restrict only to the VPN interface and set it do drop all incoming traffic on that interface unless related to some outgoing connection.