I used an Ubuntu Phone as my daily for about 6 months.

I knew a woman who used an iPhone 6 up until I think 2022.

Her secret was she never did updates. And lo and behold, the phone kept working fine and she never felt any need to get a new one. By the end, the battery lasted about 15-20 minutes.

At university in the 90s some friends and I ran our own Linux server. It was a 486 or early Pentium and we hooked it up to the university network in a post grad student’s office who was happy to just keep it running under his desk.

We even got the campus sysadmins to give us a proper edu domain name. It was a more open and different time and ethernet still meant coax cables with T connectors and terminators.

We were running pre v1 kernel on slackware and it was all installed from floppies. We used it as a web server, coded and played muds, read newsgroups and mail etc. I think tin and pine etc. we easily had 20 users using it from the computer labs.

Anyways the computer kept dying or freezing occasionally. Still early Linux. And the office where it was kept wasn’t always open and we didn’t have a key.

Being electronic engineering students we built a whole circuit with a PIC controller which plugged into the parallel port. We wrote a watchdog daemon which would keep pinging this dongle. And the firmware on the PIC would check for these pings.

If the server died the pings would stop and the dead man’s switch dongle was wired directly into the hardware reset button of the PC.

Worked like a charm for 4 years. And apparently worked for another 5 or 6 after I left.

Years ago I got a second hand Sega Saturn - it was fine for a while then stopped working because it couldn’t read the disks.

But then I discovered (not sure how) that if I turned it upside down it would work fine. So I did that for a couple of years.

I got an HP laptop in university and someone coughed a mouthful of tea onto my keyboard a few months later. At first I kept “a” on my clipboard so I could paste it as needed while typing, but soon other keys followed. So my computer is over 6 years old and I’ve been typing for almost 6 years using:

• The 4 on my num pad as the A key
• The 7 on my numpad as Q
• The 5 on my numpad as tab
• The 2 on my numpad as Z
• The help/F1 is ESC
• The numpad 1 to type 1 and exclamation points

Recently, I’ve also changed the minus on my numpad to be ` (backtick). I don’t have a capslock. Thankfully, the damage didn’t continue to spread because I would have eventually run out of keys.

Sometimes I fantasize about someone calling me out on a weird typo so I can tell them about it.

My family’s first computer baxk in the 90s was a hand-me-down power Mac from a relative. Between whatever they had done with it before we got it, and what we managed to screw up as inexperienced computer users playing around with it, it had it’s share of little quirks.

At some point we managed to turn on some screen reading function, and set the voice profile to something singsongy. It also had an error that popped up every time you started it up. The result of this is that almost 3 decades later I still have this ridiculous little tune seared into my brain after hearing my computer literally sing it who knows how many hundreds, maybe thousands of times

The globalfax software has successfully installed, however, since no fax device control panels were loaded, faxing has been disabled

Put up with it for several years, none of us knew or really cared enough to figure out how to get rid of that error or turn off the text-to-speech.

Removed by mod

When I set dark mode in an app, the top of the window would remain light, in XFCE. But in early January 2024, I realized it was because XFCE had a theme setting in both Appearance and Window Manager, and they were conflicting with each other. I ignored it for quite a while but now I’m happy with my full dark mode computer

When i boot up my (linux) PC sometimes the second monitor is all messed up. Reloading i3 with super+shift+r fixes it so i can’t be bothered to actually fix it.

My last phone the USB c port died and I just used wireless charging for like 2 years lol.

The on/off/wake button on my phone broke off. I installed an app that would wake the phone automatically if the gyro sensors sensed it was taken out of the pocket, which worked around 60% of the time. I was a broke student at the time, so I dealt with that for a year or so before buying a new phone.

The bearings of the OG case-fans started to fail so I reconfigured them to kick in when the CPU got hot. One after another I ended with only 1 left working all the time…

Had them all replaced last month, 4 fans on max are quieter than the last at 50%…

Used an OG Google pixel until about a year ago. Had to replace the battery a couple times but otherwise still mostly ran like it was brand new.

Have a Samsung Galaxy. Screen cracked by itself several months after getting it, however I was busy, didn’t have time to take it in and got used to it. Now the warranty is expired so I can’t get the screen replaced anymore. I cope by believing they wouldn’t have replaced it and would have told me it was somehow my fault despite using a fairly heavy case and not being a phone-dropper/slammer.

Oof, there’s many.

Let’s start with my older phone (Moto G5s Plus). Right since I got it, the camera focus was broken. When trying to focus, it would just vibrate and make rattling noise. HOWEVER, I found a “solution”. Hitting it just right from the back and shaking it side-to-side worked. I used it like that for 4 years.

My current phone (Poco X3 Pro)has many software bugs. Some I probably don’t remember as getting around them is a muscle memory.
Let’s start with audio. The left and right microphones are swapped. Thus I flip it around (left-handed) when recording videos. This actually affects a few different MIUI-powered phones as I found out.
Wallpaper bug:
This started appearing since I got my phone back with MIUI global instead of EEA after both MOBO replacements (yes, and both were in warranty). The lockscreen wallpaper gets stretched top to bottom after reboot, but isn’t affected by resolution. Homescreen wallpaper gets stretched if resolution is different than native, otherwise it gets zoomed in.
“Fix:”

1. For homescreen, create a black rectangle with resolution of 1080x2400 and insert the desired wallpaper into it, but slightly smaller, in center.
2. Set it as wallpaper
3. Reboot the phone
4. When asked for PIN, lock the screen first, wake it up, and just then enter the PIN. This fixes the lockscreen wallpaper.
5. Unlock the device and stay on homescreen
6. Pull down the notification bar, decrease and then increase brightness

Done! The wallpaper now has correct aspect ratio, it’s just a bit fuzzy due to upscaling.
Images created in Termux not visible to Google Photos:
Go into Google Files, rename the file to something else, then change it back. Done!

Files from Termux counting into “System storage”:
Same fix as above.

Uploads to OneDrive from Android crashing:
The solution is to use Firefox in Termux. Yes, desktop Firefox.

Poco X3 Pro screen not rotating:
The “solution” is opening Accelerometer and Gyroscope in PhyBox

MTP reporting different timestamps:
I do backups with rsync. Unfortunately, I did so over MTP, not realizing the timestamps are adjusted in some odd way. Now, unless I wish to re-do the whole backup, I have to stick to MTP. Unfortunately, I had issues with gvfs on Manjaro, so I can’t get CLI access to MTP.
Solution: Use Linux Mint for backups over MTP.

Memory card slot not working in Manjaro for 2 years:
Solution: None. Some update brought the drivers after 2 years.

School network being unrealiable:
Solution: Connecting to both Wi-Fi and mobile data at once and running my own HTTP proxy server in Termux.
Warning: The username and password isn’t encrypted in case of HTTP proxy. The proxy will likely also allow access to localhost by default. I’d recommend to null-route those requests. There may be more security issues.

ProtonVPN client being mostly broken on Arch:
Solution: Connecting to ProtonVPN on my phone and running proxy server on it.

School proxy server limiting network speed based on MAC addresses:
This one was used long time in past and kept as a backup. Unfortunately, it was needed again. It limits the speed to around 0.2Mbps if the MAC is unknown, which among other devices includes newer school PCs.
Terrible solution: Cloning MAC of one of the least used ancient desktops and using that on my laptop. I also bought RTL8152B USB Ethernet adapter, and burned that MAC into its eFuse memory (permanent). Pretty convenient.

Ok, I guess that’s enough.

My lovley Logitech gamer headset from like 2014 started to loose volume overtime on the right ear. So I just manually adjusted the volume of the right ear to about 60% while the other one had 39%. Over the years that gap grew bigger and bigger. I still use them but they sit at a configuration which now changes every week or so. The right ear sits now a 132% and the left on 39%.